Ri-lndustries have been leading manufacturers of pre-cast concrete products since 1947. Our reinforced concrete water tanks, with capacities from 5,000 litres to 22,730 litres, will enhance your environmental surroundings. Our tanks are strong and durable, including fire and bullet-proof, making them ideal for domestic, industrial and rural applications. Tanks are available for above or below ground applications.

TANK SPECIFICATIONS
5,000 litres - 1930mm diameter, Approx. 2.55 tonnes, 2240mm high.
9,090 litres - 2440mm diameter, Approx. 4.75 tonnes, 2440mm high.
13,640 litres - 2870mm diameter, Approx. 6.25 tonnes, (2440mm) high.
22,730 litres - 3450mm diameter, Approx. 9 tonnes, 2740mm high.

The inlets are in the roof and 150mm must be added on to the wall height dimensions to ascertain the inlet height.

PREPARATION OF SITE
Ensure a flat area of 4.5 metres square is dug to a depth of 75mm (or more if required to achieve a fall from gutter height) and then back-filled with a layer of 10-12mm gravel, then tank is placed directly onto this level land.
In order to fully extend the life of your Ri Tank, site preparation is essential.
Warranty conditions will be invalid if this preparation is not fully adhered to.

SITE INSTALLATION AND DELIVERY CHECKLIST
Ensure gutter outlet is above tank inlet.
Check access with Ri-lndustries as specifications may change according to size of delivery truck.
Height clearance of 8 metres (minimum) when unloading.
4.7 metres needed for truck to pass under trees and overhead power lines.
4 metres clearance required between gate posts.

Please highlight the position of any underground drains or cables.Trucks will not drive over any concrete or sealed areas without an indemnity being signed. (Including house foundations).

All data subject to change without notice.
Please ensure unloading site is level.
If a truck is unable to unload on site, cost of crane will be charged to customer's account.

Ri-lndustries strongly recommend your tank not be left empty for extended periods.
If any tank is partially buried more than 900mm in the ground there is a possibility that it may float unless precautions are taken. We suggest that the tank be filled with water immediately after placement to at least ground level until the backfill soils has been compacted.

If you have any doubts regarding your installation site, inspection can be arranged.

Click here to go to Ri-Industries

Established 1947
Leaders in Pre-cast Concrete Products
618 South Road,
Angle Park South Australia 5010
Phone: (08} 8445 7822
Fax: (08) 8268 2335
www.ri-industries.com.au